Products

Hot water supply electric heating tanks

Products

Hot water supply electric heating tanks

Our product range includes several types of such tanks.

Read more

ZK ELEKTRO – carbon steel tank without any internal coating, designed for heating systems only. The tank is designed for heating and storage of process water using electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

ZK ELEKTRO MONO – this tank is made of carbon steel with an AISI 304 stainless steel heat exchanger. This tank is also designed for heating systems, but its coil can also be used for hot water supply preparation in flow mode. Alternatively, it can be used for connecting an auxiliary source/consumer. The tank is designed to be heated by electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15kW, optionally – up to 8*15kW) or from an auxiliary source via the built-in heat exchanger of the tank. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

ZK ELEKTRO (enamelled) – this tank is made of carbon steel and coated with high-quality German glass ceramic enamel on the inside. The tank is designed for hot water supply preparation. The tank has a magnesium anode installed inside, as well as an inspection flange in the upper torisphere and several holes for heating elements installation, pipes for hot water supply fluid makeup, recirculation and discharge.

ZK ELEKTRO MONO (enamelled) – this tank is made of carbon steel and coated with high-quality German glass ceramic enamel on the inside. The tank is designed for hot water supply preparation. The tank has a spiral heat exchanger for connecting auxiliary heat source/consumer installed inside, as well as a magnesium anode installed inside; the tank has an inspection flange in the upper torisphere and several holes for setting up heating elements installation, pipes for hot water supply fluid makeup, recirculation and discharge. The tank is designed for heating and storage of hot water supply by electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15kW, optionally – up to 8*15kW) or from an auxiliary source via the built-in heat exchanger of the tank. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode) and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

SN-SS,SN-SS ELEKTRO – this tank is made of AISI 304 stainless steel and is designed for heating and storage of hot water supply from electric heating elements (2 holes x 2″; maximum capacity of heating elements is 2 x 15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode) and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

SN-SS ELEKTRO MONO – both the tank and its heat exchanger are made of AISI 304 stainless steel. The tank is designed for heating and storage of hot water supply by electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15kW, optionally – up to 8*15kW) or from an auxiliary source via the built-in heat exchanger of the tank. It comes with removable non-combustible (B-s2d0 class ) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode), reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

ZK ELECTRO

Is a carbon steel tank without any internal coating, designed for heating systems only. The tank is designed for heating and storage of process water using electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Scope of use: Accumulation of heated process water.

  • Presently, the model range of products offered includes tanks from 300 up to 5000 liters.
  • Body material: Carbon steel.
  • Warranty period: 2-7 years.

Rated volume:
300 - 5000 l

Height:
1570 - 3000 mm

Diameter:
630 - 1750 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-8000 l/h

Heat exchanger area:

Temperature hot water supply:
95 °С

Read more

ZK ELECTRO MONO

Is a carbon steel tank without any internal coating, designed for heating systems only. The tank is designed for heating and storage of process water using electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Scope of use: Accumulation and storage of heated process water.

  • Presently, the model range of products offered includes tanks from 300 up to 5000 liters.
  • Tank material: Carbon steel.
  • Heat exchanger material: AISI 304 stainless steel.
  • Warranty period: 2-7 years.

Rated volume:
300 - 5000 l

Height:
1570 - 3000 mm

Diameter:
630 - 1750 мм

Heat exchanger capacity:
3-120 kW

Performance:
375-8000 l/h

Heat exchanger area:
3,8-12 m2

Temperature hot water supply:
95 °С

Read more

ZK ELECTRO MONO (enamelled)

Tank is made of carbon steel and coated with high-quality German glass ceramic enamel on the inside. The tank is designed for hot water supply preparation. The tank has a spiral heat exchanger for connecting auxiliary heat source/consumer installed inside, as well as a magnesium anode installed inside; the tank has an inspection flange in the upper torisphere and several holes for setting up heating elements installation, pipes for hot water supply fluid makeup, recirculation and discharge. The tank is designed for heating and storage of hot water supply by electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15kW, optionally – up to 8*15kW) or from an auxiliary source via the built-in heat exchanger of the tank. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode) and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Optionally, you can order the installation of a maintenance-free Active titanium anode – for lifelong anti-corrosion protection of the tank!

Scope of use: Accumulation of heated sanitary water.

  • Presently, the model range of products offered includes tanks from 300 up to 1000 liters.
  • Product material: Carbon steel with premium class glass-ceramic enamel coating.
  • Heat exchanger material: AISI 304 stainless steel.
  • Warranty period: 2-10 years.

Rated volume:
300 - 1000 l

Height:
1570 - 2350 mm

Diameter:
630 - 930 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-4000 l/h

Heat exchanger area:
3,8-12 m2

Temperature hot water supply:
80 °С

Read more

ZK ELECTRO (enamelled)

This tank is made of carbon steel and coated with high-quality German glass ceramic enamel on the inside. The tank is designed for hot water supply preparation. The tank has a magnesium anode installed inside, as well as an inspection flange in the upper torisphere and several holes for heating elements installation, pipes for hot water supply fluid makeup, recirculation and discharge.

Optionally, you can order the installation of a maintenance-free Active titanium anode – for lifelong anti-corrosion protection of the tank!

Scope of use: Accumulation of heated sanitary water.

  • Presently, the model range of products offered includes tanks from 300 up to 1000 liters.
  • Product material: Carbon steel with premium class glass-ceramic enamel coating.
  • Warranty period: 2-10 years.

Rated volume:
300 - 1000 l

Height:
1570 - 2350 mm

Diameter:
630 - 930 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-4000 l/h

Heat exchanger area:

Temperature hot water supply:
80 °С

Read more

SN-SS

Tank is made of AISI 304 stainless steel and is designed for heating and storage of hot water supply from electric heating elements (2 holes x 2″; maximum capacity of heating elements is 2 x 15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode) and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Optionally, you can order the installation of a maintenance-free Active titanium anode – for lifelong anti-corrosion protection of the tank!

Scope of use: Accumulation and storage of heated sanitary water.

  • Presently, the model range of products offered includes tanks from 300 up to 5000 liters.
  • Product material: Stainless steel AISI 304.
  • Warranty period: 2-5 years.

Rated volume:
300 - 5000 l

Height:
1570 - 3000 mm

Diameter:
630 - 1750 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-8000 l/h

Heat exchanger area:

Temperature hot water supply:
95 °С

Read more

SN-SS ELECTRO

Tank is made of AISI 304 stainless steel and is designed for heating and storage of hot water supply from electric heating elements (2 holes x 2″; maximum capacity of heating elements is 2 x 15 kW. optionally – up to 8*15 kW) The tank can also be heated using an external plate heat exchanger. It comes with removable non-combustible (B-s2d0 class) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode) and reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Optionally, you can order the installation of a maintenance-free Active titanium anode – for lifelong anti-corrosion protection of the tank!

Scope of use: Accumulation of heated sanitary water.

  • Presently, the model range of products offered includes tanks from 300 up to 5000 liters.
  • Product material: AISI 304 stainless steel.
  • Warranty period: 2-5 years.

Rated volume:
300 - 5000 l

Height:
1570 - 3000 mm

Diameter:
630 - 1750 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-8000 l/h

Heat exchanger area:

Temperature hot water supply:
95 °С

Read more

SN-SS ELECTRO MONO

Both the tank and its heat exchanger are made of AISI 304 stainless steel. The tank is designed for heating and storage of hot water supply by electric heating elements (2 x 2″ holes; maximum capacity of heating elements is 2*15kW, optionally – up to 8*15kW) or from an auxiliary source via the built-in heat exchanger of the tank. It comes with removable non-combustible (B-s2d0 class ) 65-70 mm thermal insulation, protective magnesium anode (optionally – non-serviceable titanium anode), reinforced packaging on a wooden pallet with a crate!! It can be transported horizontally in several tiers. Optional possibility of ordering an inspection flange, operating pressure up to 10 bar (standard 6 bar) and A,B,C class thermal insulation according to ErP are available!!

Optionally, you can order the installation of a maintenance-free Active titanium anode – for lifelong anti-corrosion protection of the tank!

Scope of use: Accumulation and storage of heated sanitary or process water.

  • Presently, the model range of products offered includes tanks from 300 up to 5000 liters.
  • Tank material: AISI 304 stainless steel.
  • Heat exchanger material: AISI 304 stainless steel.
  • Warranty period: 2-5 years.

Rated volume:
300 - 5000 l

Height:
1570 - 3000 mm

Diameter:
630 - 1750 mm

Heat exchanger capacity:
3-120 kW

Performance:
375-8000 l/h

Heat exchanger area:
3,8-12 m2

Temperature hot water supply:
95 °С

Read more